Scanning QR Checkpoints

Before You Start

Ensure:

  • āœ… Your IMEI is registered by your admin and you have access to the app.
  • āœ… Your shift is active (visible on the home screen).
  • āœ… Location (GPS) is enabled on your phone.
  • āœ… You are physically at the checkpoint location.

Step-by-Step Scanning

  1. Open the SoftaLabs Guard App.
  2. Tap the Scan button (camera icon) at the bottom of the screen.
  3. Point your camera at the QR code on the wall/post.
  4. Hold steady until the code is recognized.
  5. You will see one of two responses:
āœ… Scan Successful:
  • Green confirmation screen
  • Checkpoint name and timestamp shown
  • Scan is submitted to the dashboard
āŒ Scan Failed:
  • Red error screen with reason
  • Try again or report to your supervisor

Common Scan Errors

Error MessageWhat It Means
"Outside GPS radius"You are too far from the site. Move closer.
"Invalid QR Code"The QR is damaged or outdated. Report to admin.
"No internet connection"Scan is buffered. It will upload when connected.
"Location not available"Enable GPS and wait for signal.
↔ Swipe horizontally to view all columns

Offline Scanning

If you lose internet connectivity:

  • Scans are cached locally on the device.
  • When connection is restored, all cached scans are automatically uploaded.
  • You will see a sync indicator in the app.